Piezo sensor KS

產品型號：KS-C3

簡要描述：Piezo sensor KS：The vibration sensors of the KS series are used to detect absolute vibrations on machines and system components in the frequency range of approx.

廠家實力
Manufacturer Strength
有效保修
Valid Warranty
質量保障
Quality Assurance

產品咨詢

聯(lián)系我們

產品分類

PRODUCT CLASSIFICATION

技術文章

TECHNICAL ARTICLES

HBM稱重傳感器能夠有效抵抗電磁干擾和環(huán)境噪聲的影響2025-09-17
HBM拉壓力傳感器的工作原理與應用2024-10-24
2026型標準負荷測量儀的產品特點及應用領域2022-11-08
單懸臂梁傳感器技術原理與應用詳解2025-04-03
HBM波紋管傳感器的結構設計及性能特點2025-02-12
2025型標準負荷測量儀采用了先進的數(shù)字電子技術2023-04-14
HBM稱重傳感器的使用注意事項需牢記！2021-10-20
HBM力傳感器的校準與維護方法2024-12-16
HBM稱重傳感器在使用時要進行定期維護2022-06-09
稱重顯示儀表在食品安全領域的應用與挑戰(zhàn)2024-08-23

詳細介紹

Piezo sensor KS：

The vibration sensors of the KS series are used to detect absolute vibrations on machines and system components in the frequency range of approx. 0.5Hz to 10kHz and temperature range of -20 to 120°C. The PIEZO sensors work according to the shear principle with IEPE supply.

The shear principle PIEZO sensors with IEPE supply provide a voltage signal proportional to the acceleration, which is modulated onto the phantom supply.

The robust, double-shielded stainless steel housing ensures good signal quality even in rugged industrial applications with EMC exposure.

Piezo sensor KS：

Robust, double-sealed stainless steel housing

Insulated housing to avoid ground loops

Double shielding for improved EMC protection

M12 connector for easy mounting

Measurement in all directions

Temperature range from -20 ... 120°C

Technical data

	KS80D	KS81B	KS74-C10
Output	IEPE	IEPE	IEPE
Measuring principle	PIEZO, Shear principle	PIEZO, Shear principle	PIEZO, Shear principle
Sensitivity	100mV/g ± 5%	100mV/g ± 5%	10mV/g ± 5%
Measuring range	±55g	±60g	±600g
Fracture acceleration	4000g	4000g	5000g
Linear frequency response f5%	0,4 ... 13000 Hz	0,4 ... 13000 Hz	0,35 ... 8000 Hz
Resonant frequency +25dB	> 32 kHz	> 23 kHz	>42 kHz
Transverse direction factor	< 5%	< 5%	< 5%
Inherent noise (rms value; 0.5 Hz - 20 kHz)	< 300 µg	< 300 µg	< 300 µg
Noise densities 100 Hz	1 μg/√Hz	1 μg/√Hz	2 μg/√Hz
Constant current supply	2 .. 20mA	2 .. 20mA	2 .. 20mA
Operating point voltage at ICONST = 4 mA	12 .. 14 V	12 .. 14 V	12 .. 14 V
Output impedance at ICONST = 4 mA	< 130 Ω	< 130 Ω	< 130 Ω
Working temperature range	-20 / 120 °C	-20 / 120 °C	-20 / 120 °C
Temp. coefficient of sensitivity	±0,05 %/K (-20 .. 0°C) >-0,02 %/K (0 .. 30°C) >-0,07 %/K (30 .. 120°C)	±0,05 %/K (-20 .. 0°C) >-0,02 %/K (0 .. 30°C) >-0,07 %/K (30 .. 120°C)	±0,06 %/K (-20 .. 0°C) >-0,02 %/K (0 .. 80°C) >-0,06 %/K (80 .. 120°C)
Temperature jump sensitivity	0,01 ms-2/K	0,01 ms-2/K	0,1 ms-2/K
Degree of protection	IP67	IP67	IP64
Ground without cable	65,5g	102g	28,5g
Case material	Stainless steel	Stainless steel	Stainless steel
Cable connection	axial	radial	axial
Socket	Binder 713	Binder 713	TNC
Mounting thread	M8	M8	M5